Yes, David!

That is what I missed – the particles size is an important measure to
consider – and report.

Thanks,

Anders

 

From: Food Composition Discussion Group
[mailto:[log in to unmask]] On Behalf Of Haytowitz, David
Sent: 11 May 2015 19:47
To: [log in to unmask]
Subject: Re: Best Practices for Calculating Density Conversion Factors

 

Hello:

   The hard part of determining the density of foods is getting an accurate
measure of the volume.  Foe liquids, it’s fairly straightforward.  You take
a graduated cylinder and weigh it with and without the liquid and you can
read the volume off the markings.  This will also work with dry powders and
foods composed of small particles.  However, the final measurement of the
density will be affected by the degree of compaction.  This is why we see
recipes in the US call for sifted flour, as we use cups rather than weighing
out the flour.

  However trying to determine the volume of an irregularly shaped piece of
food, say a piece of broccoli or a loaf of bread, is much harder.
Archimede’s principle figures out volume by displacement, but you can’t use
water if the material you’re measuring will absorb the water, so you have to
use a dry substance, such as very small seeds.  The baking industry
traditionally used canola seeds, but any very small seed will do.  You
determine the volume of the seeds, then add the food you’re measuring being
sure to completely cover it, then measure the volume again.

  Hope this is helpful.

 

 

David B. Haytowitz

Nutritionist

USDA, Agricultural Research Service

Nutrient Data Laboratory

Room 207A, Building 005, BARC-West

10300 Baltimore Avenue

Beltsville, MD 20705

301.504.0714 (voice)

301.504.0632 (fax)

 <mailto:[log in to unmask]> [log in to unmask]

 

 

 

From: Food Composition Discussion Group
[mailto:[log in to unmask]] On Behalf Of Charrondiere,
Ruth (ESN)
Sent: Monday, May 11, 2015 10:43 AM
To: [log in to unmask]
Subject: Re: Best Practices for Calculating Density Conversion Factors

 

Dear Jessica,

you take a laboratory scale, put an empty glass or other container on it,
weigh it. Then fill it up with water coming from the fridge. weigh it.
Record the difference in weight which is your volume. Then weigh all foods
in this container and divide it by the volume. Describe the food well, e.g.
fish powder, loose; raw eggplant without skin in 1 cm cubes. Record your
location (altitude). I would be happy to include your data in our next
version of the FAO/INFOODS density database

 

Best wishes

Ruth

 

P.S. Anyone else willing to contribute data are most welcome

  _____  

From: Food Composition Discussion Group
[[log in to unmask]] On Behalf Of Raneri, Jessica
(Bioversity) [[log in to unmask]]
Sent: Monday, May 11, 2015 2:12 PM
To:  <mailto:[log in to unmask]>
[log in to unmask]
Subject: Best Practices for Calculating Density Conversion Factors

Dear Infoods Members,

 

We’re currently attempting to identify the density conversion factors of
some unique foods in Vietnam in order to analyse 24hr recall data. Is anyone
aware of guidelines or best-practices manual on how to calculate these
densities? We would like to eventually make the data publically available.

 

Many thanks in advance.

 

Jessica Raneri, MSc
Nutritionist,  Research Support Officer

Nutrition and Marketing Diversity Programme, 

 <http://www.bioversityinternational.org/> Bioversity International 
Via dei Tre Denari, 472/a 
00057 Maccarese (Fiumicino) 
Rome, Italy 

 

P Please consider the environment before printing this e-mail

 

 

 

 

  _____  

To unsubscribe from the InFoods-Food-Comp-L list, click the following link:
 <https://listserv.fao.org/cgi-bin/wa?SUBED1=InFoods-Food-Comp-L&A=1>
https://listserv.fao.org/cgi-bin/wa?SUBED1=InFoods-Food-Comp-L&A=1 

 

  _____  

To unsubscribe from the InFoods-Food-Comp-L list, click the following link:
https://listserv.fao.org/cgi-bin/wa?SUBED1=InFoods-Food-Comp-L
<https://listserv.fao.org/cgi-bin/wa?SUBED1=InFoods-Food-Comp-L&A=1> &A=1 

 

  _____  

To unsubscribe from the InFoods-Food-Comp-L list, click the following link:
https://listserv.fao.org/cgi-bin/wa?SUBED1=InFoods-Food-Comp-L
<https://listserv.fao.org/cgi-bin/wa?SUBED1=InFoods-Food-Comp-L&A=1> &A=1 


########################################################################

To unsubscribe from the InFoods-Food-Comp-L list, click the following link:
https://listserv.fao.org/cgi-bin/wa?SUBED1=InFoods-Food-Comp-L&A=1